On this service call in Zephyrhills, FL (completed December 29, 2025), the property owner reported a puddle of water at the exterior cleanout. That symptom is often linked to a branch line stoppage or main drain clog, where wastewater can’t move freely through the drain line.
We accessed the system from the rear exterior cleanout and performed professional mechanical drain cleaning using a RIDGID K-60 equipped with a 7/8" cable and a 3" cutter head. This setup is designed to clear tough obstructions while restoring full pipe flow without relying on harsh chemical drain cleaners.
The stoppage was located approximately 60 feet from the cleanout. As we worked the cable and cutter head through the line, we retrieved non-flushable debris—including hygiene products and plastic remnants—which commonly snag in drain piping and lead to repeat clogs, slow drains, and backups.
After confirming the branch line was open and draining properly, we addressed a separate indoor drainage issue by cleaning the bathroom sink pop-up assembly. Removing buildup from the pop-up and linkage helps restore smooth drainage and reduces the chance of recurring lavatory drain clogs.
Exterior Cleanout Symptom Check
We started at the exterior cleanout where water was pooling—often a sign of a main drain restriction or branch line stoppage.
Cleanout Access for Drain Service
Using the rear cleanout provides direct access for controlled drain snaking and safer service.
Running the Drain Machine
A professional drain machine with a 7/8" cable and 3" cutter head was used to break through the clog.
Clearing the Stoppage Point
The blockage was located roughly 60 feet from the cleanout and cleared to restore full drainage.
Bathroom Sink Pop-Up Cleaning
We cleaned the bathroom sink pop-up assembly to remove buildup and restore smooth lavatory drainage.
Removing Non-Flushable Debris
We retrieved non-flushable materials such as hygiene products and plastic that caused the drain blockage.