In Orlando, Florida during December 2025, a service call was completed to resolve a leaking hose bib that had been reported as malfunctioning. Exterior hose bibs are exposed to frequent use and weather conditions, making them vulnerable to seal failure, corrosion, and pipe damage behind the wall.
The service began with a detailed inspection of the exterior faucet to confirm the leak and determine the extent of the failure. Once verified, the water supply was shut off and the damaged hose bib was removed to allow access to the piping behind the wall.
With the wall opening exposed, the interior pipe was inspected for damage before preparing the connection for a new installation. Addressing these issues prior to installation helps ensure long-term reliability and prevents repeat leaks.
After the piping was properly prepared, a new exterior hose bib was installed and tested under pressure. The completed repair restored dependable outdoor water access with secure, leak-free performance.
Leaking Hose Bib Inspection
The exterior hose bib was inspected to confirm active leaking and determine whether the failure was caused by worn internal seals or structural damage requiring full replacement.
Damaged Hose Bib Removal
The failed hose bib was fully removed, revealing damage that prevented proper shutoff and allowing clear access to evaluate the pipe connection behind the wall.
Inspecting Pipe Inside the Wall
With the hose bib removed, the wall opening exposed the interior piping, allowing inspection for corrosion, cracks, or joint failure before installing new components.
Preparing the Pipe for Installation
The damaged section of piping was corrected and secured, creating a solid and properly aligned connection point for the new hose bib installation.
New Hose Bib Installed
The new exterior hose bib was installed with proper thread sealing and alignment, then tested under pressure to confirm smooth operation and leak-free performance.